PALFIQUE LX5 is a light-cured, radiopaque, submicron filled composite resin for use in anterior and posterior restorations and is indicated for all carious classes. PALFIQUE LX5 contains 82% by weight (71% by volume) of silica-zirconia filler and composite filler. A high filler load offers decreased polymerization shrinkage. All inorganic filler contained in PALFIQUE LX5 is a spherical submicron filler (mean particle size: 0.2μm, particle size range: 0.1 to 0.3μm) that is designed to deliver excellent gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate.
PALFIQUE LX5 implements Radical-Amplified Photo polymerization initiator technology(RAP technology). Curing time for PALFIQUE LX5 can be shortened by one-third using a light curing unit with a wavelength range of 400 to 500nm (peak: 470nm) compared to our conventional resin composite.
RAP technology facilitates a longer working time for PALFIQUE LX5.
INDICATIONS
- Direct anterior and posterior restorations including the occlusal surface and all carious classes
- Direct bonded composite veneer
- Diastema closure
- Repair of porcelain/composite
CONTRAINDICATIONS
- PALFIQUE LX5 contains methacrylic monomers.
- DO not use PALFIQUE LX5 for patients allergic to or hypersensitive to methacrylic and related monomers.
PRECAUTIONS
DO NOT use PALFIQUE LX5 for any purpose other than those listed in these instructions.
- Use PALFIQUE LX5 only as directed herein.
- PALFIQUE LX5 is designed for sale and use by licensed dental care professionals only.
- It is not designed for sale nor is it suitable for use by non-dental care professionals.
- DO NOT use PALFIQUE LX5 if the safety seals are broken or appear to have been tampered with.
- If PALFIQUE LX5 causes an allergic reaction or oversensitivity, discontinue its use immediately.
- Use examination gloves (plastic, vinyl, or latex) at all times when handling PALFIQUE
- LX5 to avoid the possibility of allergic reactions from methacrylic monomers.
- Note:Certain substances/materials may penetrate through examination gloves. If PALFIQUE LX5 comes in contact with the examination gloves, remove and dispose of the gloves, and wash hands thoroughly with water as soon as possible.
Avoid contact of PALFIQUE LX5 with eyes, mucosal membrane, skin and clothing.
- 1) If PALFIQUE LX5 comes in contact with the eyes, thoroughly flush eyes with water and immediately contact an ophthalmologist.
- 2) If PALFIQUE LX5 comes in contact with the mucosal membrane, wipe the affected area immediately, and thoroughly flush with water after the restoration.
- 3) If PALFIQUE LX5 comes into contact with the skin or clothing, immediately saturate the area with alcohol-soaked cotton swab or gauze.
- Instruct the patient to rinse his mouth immediately after treatment.
- PALFIQUE LX5 should not be ingested or aspirated. Ingestion or aspiration may cause serious injury.
- To avoid the unintentional ingestion of PALFIQUE LX5, do not leave it unsupervised within the reach of patients and children.
- Clean the placement instruments with alcohol after use.
- When using a light-curing unit, protective eye shields, glasses or goggles should be worn.
INDICATIONS FOR FILLING AND CURING
Be sure to light-cure PALFIQUE LX5 extraorally and check the time needed for complete hardening of PALFIQUE LX5 with your light curing unit before performing the bonding procedure.
FEATURES
- Wide shade matching range
- High wear resistance
- Less wear to opposing teeth
KEY SPECIFICATION
- Low shrinkage
- Good radiopacity
- Quick curing time
- Extended workig time
- Outstanding polishability
PACKING
1 Syringe(3.8g)
Shades A1,A2,A3,OA2,OA3,SW,CE,WE and OPA2.