Acteon Mini LED Light Cure Unit - SuperCharged

Mini LED SuperCharged
highly adaptable Mini LED Supercharged gives the greatest power while offering totally safe modes for the tooth and the restoration.
Use of 3 different modes gives you the flexibility to polymerize almost all composites, bonding agents and sealants
available on the market. The Mini LED SuperCharged unit has a unique memory function that stores the most recently
used configuration of mode and function.

 Features

The latest generation L.E.D. (Light Emitting Diode) curing lights offer all that is expected of this new technology and the most recent design developed by Acteon® combines power, efficiency, and speed.

Its power (2000 mW/cm2) is greatly superior to that of most halogen lamps and nearly as efficient as plasma lamps, without raising the temperature.

It emits light in the most efficient part of the spectrum, suiting most composites currently available: camphoroquinone (470nm), PPD or PAB(430nm). It takes only 6 to 12 seconds to polymerize
2mm of any composite.

Efficiency and Cold Light

• Mini LED Supercharged emits light in the most relevant and most efficient spectrum (420 to 480 nm),unlike the wavelenghts of halogen lamps (over 480 nm) of which only 20% can be utilized and 80% is lost in heat.
• Power: 2000 mW/cm2
• Mini LED Supercharged is a very high powered lamp, it generates 2000 mW/cm2 light intensity with a single L.E.D.

Design and Ergonomics

• Rounded surfaces allow for easy and comfortable manipulation.
• Compact and lightweight (160g).
• Silent: No fan.
• Light guide rotates through 360°.
• Base-charger can be turned in all directions and features stand-by indicator and low battery warning.
• Built-in radiometer (efficiency tester).

Best Quality Materials

• One-piece glass rod light guide provides 30% more emitting power, available in two models: “Universal” (Ø7.5mm) and “Booster” (Ø5.5mm).
• Anodized Aluminium hand-piece. Latest generation of SMD electronics.
• Very high-quality single L.E.D. built into a patented optic module.
• Li-Ion battery with no memory effect that means 300 successive cycles before needing to recharge (at least one week’s work).

Key Specifications

Unit including Lithium:

• Ion battery Size: Ø24mm x 201mm
• Weight: 160g

Transformer:

• Working voltage: 100 V AC to 240 V AC
• Frequency : 50 Hz to 60 Hz
• Voltage: 12V DC
• Output voltage: 0.8A

Battery Type:

• Lithium-Ion Capacity: 2,300mAh
• Charging time: 2 hours 30 minutes (in case battery is completely empty)

Optical specifications:

• Wavelength: 420-480nm
• Power: Ø7.5mm
• light guide - 2,000mW/cm² Ø5.5mm
• light guide - 3,000mW/cm²

Packaging

• Unit (Handpiece + Lithium-Ion battery)
• 7.5mm opalescent light guide
• Base stand (battery charger)
• Eye shield
• Transformer.