Hu-Friedy 15 Unc Color Coded Probe - ( Qulix™ probe )

1-2-3-4-5-6-7-8-9-10-11-12-13-14-15 Qulix™ probes are color-coded with accurate, smoothly finished black markings, which will not chip, flake or fade.

SPECIFICATION

Cleaning

• If possible, an automatic procedure in a dental instrument washer unit should be used for cleaning of the instruments.
• A manual procedure – even in case of application of an ultrasonic bath – should only be used if an automatic procedure is not available or if such a method is not compatible with specific materials; in this case, the significantly lower efficiency of a manual procedure must be considered.
• All assembled instruments must be disassembled before reprocessing.

Maintenance

• Assemble disassembled instruments if necessary.
• Light corrosion on the surface can be removed with Hu-Friedy Penetrating Oil (IPS) or Shine reNEW (IMS-1453 or IMS-1455). If the corrosion cannot be completely eliminated, the instruments should be removed from use. Otherwise such corrosion could damage other instruments.
• After treating an instrument with Shine renew or IPS, the instrument must be cleaned and sterilized once more.

Sterilization

• Please use only the recommended sterilization procedures listed below.
• Other sterilization procedures are the responsibility of the user.
• Hu-Friedy recommends a minimum 30 minute dry time; however defer to the manufacturer’s instructions for the equipment used.

Storage

• Please store the instruments after sterilization in a dry and dust free place in the clean section of the instrument processing area. Sterilization can only be maintained, if the instruments remain packaged or wrapped - impermeable to micro-organisms - following validated standards.
• The status of the sterilization has to be clearly indicated on the wrapped packages or the containers. For safety reasons, keep sterile and non-sterile instruments strictly apart.

PACKING
1 x Unc Color-Coded Probe.